What should I do if the concrete batching plant suddenly stops turning?

Yalong technical consultants have made a clear analysis of the non-rotating phenomenon of the concrete batching plant equipment during production.

The first is to consider the serious overload, and the second is that there is a large gap between the mixing blade or the side blade and the inner wall of the tank. The other is that the motor drive belt is too loose, and the mixing shaft of the concrete mixer exceeds the normal working load, which will make the mixing shaft rotate slowly. If the load is too large, the mixing shaft will stop rotating. This situation can also cause the concrete mixer shaft to stop rotating or rotate slowly.

A large foreign body between the mixing blade or side blade and the inner wall of the tank will also cause the mixing shaft to stop rotating.

If the motor drive belt of the concrete mixer is too loose, it can also cause the mixing shaft of the concrete mixer to rotate slowly or stop rotating, and the motor drive belt is too loose, resulting in insufficient power transmission. So how do we solve the problem that the concrete mixing plant stops rotating and the concrete mixer is overloaded and the mixing shaft stops rotating.

It is only necessary to adjust the feeding amount, discharge the excess material, and reduce the rotating load of the mixing shaft. When the material is stuck between the side blades and the inner wall of the gate, there is often a sharp and harsh friction sound before the mixing shaft stops. The gap between the inner walls of the tank. If the motor drive belt of the concrete mixer is too loose, it is only necessary to adjust the tension of the motor drive belt of the concrete mixer after the machine is stopped.